15
▲ Now your DAY TIME is defined (NIGHT is defined as the period between DAY end and start
times). If you do not make your own settings for DAY, a default of 6AM~6PM is used. Example:
07—18 would define DAY as from 7AM to 6PM (6PM=18:00 hours on 24 hr clock).
▲ It’s better to observe the right time for the day and night in the camera location to get good
picture quality.
7. Using the Camera
Mounting the Camera
It is recommended that you mount the camera 1.2~1.5 meters off the ground with the camera
pointed at a slight downward angle. Be sure to avoid mounting the camera facing east or west as
the rising and setting of the sun could produce false triggers and overexposed images. So as not
to block the camera lens or PIR sensor, clear branches and other debris away from the front of
the camera.
To Next Page
Loading...