Need help?Do you have a question about the ProStalk PC3000IR and is the answer not in the manual?
General| Megapixels | 12MP |
|---|---|
| Video Resolution | 1080p |
| Resolution | 12MP |
| Flash Type | Infrared |
| Battery Life | Up to 6 months |
| Memory Card Support | Up to 32GB SD card |
| Waterproof Rating | IP66 |
| IR Flash Range | 65 feet |
| Detection Range | 65ft |
Set the preset time in minutes the camera will sleep between PIR triggers.
Configure the number of pictures or video clips taken per PIR trigger.
Set the date, year, and time to stamp captured images.
Select the desired resolution for captured photos (High, Med, Low).
Adjust the movie recording length between 10 to 90 seconds.
Control the IR Flash for night vision; 'Auto' or 'Off' options available.
Define specific time periods for the camera to be active.
Input user details like name and location to be stamped on photos.
Set or remove a 6-digit password to control camera usage.
Select the display language for the camera's menu interface.
Configure the automatic IR filter switch based on day and night time.
Guidance on mounting the camera 1.2-1.5 meters high with a downward angle.
Test the camera's detection range and adjust its position for optimal coverage.
To Next Page