13
The Camera has four options:
a) All time. The camera works 24 hours a day.
b) Day. The camera works from 6:00 ~ 18:00.
c) Night. The camera work from 18:00 to next day 6:00.
d) Customize. User can set the camera working at any time period.
Setting the Duty Time
a) Sliding the “Power” toggle switch to “On” then to “Set”
b) Rotate the menu items by “UP” or “DOWN” button, until it shows “DutyTime”
c) Press “OK” to enter the setting.
d) Press “UP” and “DOWN” to choose the “Alltime”, “Day”, “Night” and “Customiz”, press “OK”
to confirm the setting.
e) When come to the 4
th
option - “Customiz”, the display will show for example “06--18”. The
first 2 digits represent the starting point and last 2 digits represent the ending point. Press
the "Up" or "Down" button to set time of 24 hour clock for the start hour desired. Press “OK”
to set the start time. Then, underscore will move to the second 2 digits. Press the "Up" or
"Down" button to set time of 24 hour clock for the end hour desired. Press “OK” to confirm
the setting.
Example:
07—18 would define DAY as from 7AM to 6PM (6PM=18:00 hours on 24 hr clock).
20—04 would define DAY as from 8PM to next day 4AM (8PM=20:00 hours on 24 hr clock).
6.8 Setup User Inf ormation
The camera allows user to setup the user information in the unit. This information will be
stamped on each photo. For example, user can input the name, telephone and camera location
to mark each photos.
a) Sliding the “Power” toggle switch to “On” then to “Set”
b) Rotate the menu items by “UP” or “DOWN” button, until it shows “UserInfo”
c) Press “OK” to enter the setting and will display the information that set last time and the
cursor will blink at the first letter.
d) Press “UP” and “DOWN” to choose the first letter and press “OK” to confirm this letter and
proceed to the next. The camera can display “A~Z”, “0-9”, “-“, space, “(“and “)”. The
maximum length of the information is 16 characters.
e) Press “OK” to confirm the setting
6.9 Setup o r C le a r Password
a) Sliding the “Power” toggle switch to “On” then to “Set”
To Next Page
Loading...