EasyManua.ls Logo

ProSun Sundream 12 - Equipment Operation; Operation Modes

ProSun Sundream 12
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
MARK76R0001 Rev 3
Equipment Operation
Before turning on the equipment make sure you have proper warning signs at your location.
We recommend permanently placing a Warning sign on the wall close to the tanning bed such
as the one below:
WARNING
UV Radiation can cause eye and skin damage as
well as skin aging and possibly skin cancer. Ask the
sta󰀨 for further information.
Wear protective eye goggles.
Certain medicicines or cosmetics can increase the
sensitivity of the skin to UV radiation. If in doubt
consult your physician.
Operating Modes:
There are 2 di󰀨erent operating modes for this equipment.
Standby Mode
The tanning bed is in an idle state, it is connected to the power but is currently not in use. The
UV lamps in the unit are not turned on at this time.
Tanning Mode
The tanning bed is in use and the UV lamps are on. The session time is counting down and
can be stopped by turning o󰀨 the dial timer.

Related product manuals