Protocol AIR HOVER RACER User Manual

TROUBLESHOOTING
RE-CALIBRATING THE ALTITUDE SENSOR
If the drone crashes and after re-starting and trimming, it still is unstable, you have
the option to re-calibrate the drone.
1. Turn on the drone and then the remote and sync.
2. Push and hold the direction stick to the lower right corners.
3. The light on the drone will flash to indicate that the drone has re-calibrated.
13

Protocol AIR HOVER RACER Specifications

General

Brand	Protocol
Model	AIR HOVER RACER
Category	Drones
Language	English