If not already installed, install the included blade guards to every corner by
snapping them in and tighten the screws at the base.
NOTE: If the drone crashes, double check to make sure the blade guard is
not loose. If it is, re-tighten before ying.
INSTALLING THE BLADE GUARDREMOTE BATTERY INSTALLATION
1. Install batteries carefully.
2. Do not mix old and new batteries.
3. Do not mix dierent types of batteries.
Unscrew and remove battery cover from controller. Insert 4 x ‘AA’ batteries
according to indicated polarities. Replace and screw back in battery cover.
4
5
Battery cover
To Next Page
Loading...
