EasyManua.ls Logo

Proton SLR mini 3060 User Manual

Default Icon
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Page 1 of 126
Proton Products SL mini and SLR mini Series Speed and Length Gauges Instruction Manual - issue 1s
Instruction Manual
SL mini and SLR mini Series Speed and Length
Gauges
Issue 1s
5 December 2016
Proton Products International Ltd.
www.protonproducts.com

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Proton SLR mini 3060 and is the answer not in the manual?

Proton SLR mini 3060 Specifications

General IconGeneral
BrandProton
ModelSLR mini 3060
CategorySecurity Sensors
LanguageEnglish

Summary

DECLARATION OF CONFORMITY (CE)

DECLARATION OF CONFORMITY (CSA)

LASER SAFETY PARAMETERS

INTRODUCTION

PRINCIPLE OF OPERATION

Explanation of the underlying technology and operational principles.

SPECIFICATIONS

MODEL-SPECIFIC SPECIFICATIONS

Specific technical details for different SL and SLR mini models.

COMMON SPECIFICATIONS

General technical specifications applicable to all models.

OPTIONAL ACCESSORIES

POWER

COMMUNICATIONS

PROTECTION

INSTALLATION PRECAUTIONS

Protect from impact

Guidance on protecting the gauge from physical impact.

Do not open or disassemble

Warning against opening or disassembling the gauge.

Periodic maintenance

Laser radiation hazard

Safety information regarding laser radiation hazards.

INSTALLATION SEQUENCE

MECHANICAL INSTALLATION

Stand-off distance and depth-of-field

Information on stand-off distance and depth-of-field for accurate measurement.

Object stabilisation

Instructions for ensuring object stability during measurement.

Optical alignment

Recommendations for correct optical alignment of the gauge.

MEASUREMENT DIRECTION

SL MINI UNIDIRECTIONAL SPEED AND LENGTH GAUGE

Details on the unidirectional SL mini gauge's measurement direction.

SLR MINI BIDIRECTIONAL SPEED AND LENGTH GAUGE

Details on the bidirectional SLR mini gauge's measurement direction.

ELECTRICAL INSTALLATION

Earth connection

Instructions for making a secure earth connection.

LASER ENABLE

SHUTTER CONTROL

SHUT_EN input electrical specifications

Electrical specifications for the SHUT_EN input.

SHUT_ST output electrical specifications

Electrical specifications for the SHUT_ST output.

POWER SUPPLY

CONFIGURATION

PCIS_SLMINI SOFTWARE INSTALLATION

Steps for installing the PCIS_SLMINI software.

CONNECTION AND SOFTWARE START UP

Procedure for connecting the PC and starting the software.

WIFI CONFIGURATION

PCIS_SLMINI MAIN PAGE

MEASUREMENT CONFIGURATION

Normal Operation Mode

Details on setting up the gauge for normal length measurement.

Batch Operation Mode

Instructions for using the gauge in batch operation mode.

Object Detection Mode

Explanation of the Object Detection mode for discrete objects.

STANDARD COMMUNICATIONS INTERFACES

CAN-BUS COMMUNICATIONS

Details on the CAN-bus communication interface.

CAN-bus configuration

Steps for configuring the CAN-bus interface.

RS-232 COMMUNICATIONS

Proton standard RS232 parameter access protocol

Modbus parameter access protocol

ETHERNET COMMUNICATIONS

OPTIONAL COMMUNICATIONS INTERFACES

ETHERNET / IP OR PROFINET COMMUNICATIONS

DEVICENET COMMUNICATIONS

STANDARD ELECTRICAL INTERFACES

LOGIC OUTPUTS

PULSE OUTPUTS

DATA LOGGING

CONNECTOR PIN OUTS

KEY SWITCH

INPUT PARAMETERS

OUTPUT PARAMETERS

APPENDIX 1: HIGH ACCURACY LENGTH MEASUREMENT OF DISCRETE OBJECTS APPLICATION NOTE

Related product manuals