Proton SL mini 3060 User Manual

Page 1 of 126
Proton Products SL mini and SLR mini Series Speed and Length Gauges Instruction Manual - issue 1s
Instruction Manual
SL mini and SLR mini Series Speed and Length
Gauges
Issue 1s
5 December 2016
Proton Products International Ltd.
www.protonproducts.com

Proton SL mini 3060 Specifications

General

Brand	Proton
Model	SL mini 3060
Category	Security Sensors
Language	English

Summary

Declaration of Conformity (CE)

Declaration of Conformity (CSA)

Laser Safety Parameters

Specifications

Model-Specific Specifications

Common Specifications

Optional Accessories

Power

PSU-BOB mini

Terminal Expander

Communications

Industrial Bus Module

Installation

Precautions

Important precautions regarding temperature, impact, and disassembly.

Laser Radiation Hazard

Mechanical Installation

Stand-off Distance and Depth-of-Field

Optical Alignment

Measurement Direction

SL Mini Unidirectional Speed and Length Gauge

Electrical Installation

Earth Connection

Shielded Cables

Laser Enable

Shutter Control Switch, Shutter Enable Input and Shutter State Output

Power Supply

Configuration

PCIS_SLMINI Software PC System Requirements

Minimum system requirements for installing and running the PCIS_SLMINI software.

PCIS_SLMINI Software Installation

Step-by-step guide for installing the PCIS_SLMINI software on a PC.

Connection and Software Start Up

WIFI Configuration

PCIS_SLMINI Main Page

Measurement Configuration

Normal Operation Mode

Batch Operation Mode

Object Detection Mode

Standard Communications Interfaces

CAN-bus Communications

Details on the standard CAN-bus interface, its protocol, and LED indicator.

CAN-bus Interface

CAN-bus Configuration

RS-232 Communications

RS-232 Interface

Details on the standard RS-232 interface, its pins, and connection to a PC.

RS-232 Communications Configuration

Proton Standard RS232 Parameter Access Protocol

Modbus Parameter Access Protocol

Ethernet Communications

Ethernet Interface

Details the Ethernet interface pins and connection for standard Ethernet communication.

Ethernet Configuration

Input Parameter Write Disable

UDP Protocol

Optional Communications Interfaces

PROFIBUS Communications

Details on the optional PROFIBUS interface, its pins, and LED indicator.

PROFIBUS Interface

PROFIBUS Configuration

Ethernet / IP or PROFINET Communications

EtherNet / IP or PROFINET Interface

Details the EtherNet/IP or PROFINET interface pins and connection for industrial bus communication.

EtherNet / IP or PROFINET Configuration

DeviceNet Communications

DeviceNet Interface

Details the DeviceNet interface pins, connection, and wire colours.

DeviceNet Configuration

Standard Electrical Interfaces

Logic Inputs

Details on connecting and configuring the gauge's standard logic inputs.

Logic Inputs Connection

Pinout and connection details for the two standard logic inputs.

Logic Inputs Electrical Specification

Electrical specifications for the logic input circuits.

Logic Inputs Configuration

Logic Outputs

Logic Outputs Connection

Pinout and connection details for the two standard logic outputs.

Logic Outputs Electrical Specifications

Electrical specifications for the logic output circuits.

Logic Outputs Configuration

Pulse Outputs

Pulse Outputs Connection

Details the four pulse outputs, their pins, and connection options.

Pulse Outputs Electrical Specifications

Circuit Information and Gauge Performance Indicators

Data Logging

Connector Pin Outs

Optional PSU-BOB MINI

CAN

RS232

Screw Terminals

Key Switch

Input Parameters

Output Parameters

Appendix 1: High Accuracy Length Measurement of Discrete Objects Application Note

Problem

Solution

Implementation

Connections to the SL / SLR / SL mini / SLR mini Gauge

DB25 INTERFACE Socket Logic Input Pin Designations

PSU-BOB-SL Screw Terminal Designations (for SL and SLR gauges only)

PSU-BOB-SL-mini Screw Terminal Designations (for SL mini and SLR mini gauges only)

Logic Input Electrical Characteristics

Gauge Software Configuration

Example Implementation Using Banner QS18 Laser Emitters and QS186LE NPN Sensors

SL / SLR Gauge Configuration via RS232

SL mini / SLR mini Configuration