Page 74 of 126
Proton Products SL mini and SLR mini Series Speed and Length Gauges Instruction Manual - issue 1s
Input Parameter Write Disable
The gauge may be configured to write-disable specific input parameters when a page of input
parameters is written via the optional DeviceNET, PROFIBUS, PROFINET or EtherNet/IP
communications interface.
Input parameters may be write-disabled for the following purposes:
To simplify setup: all unused input parameters may be write-disabled to simplify the
composition of the written data page.
To avoid unintended modification of specific parameters: input parameters which must
NOT be changed via the optional communication interface (e.g. input parameters which
determine the operating mode of the gauge) may be write-disabled.
Input parameter write-disable does NOT apply to the CANbus, RS-232 or Ethernet interfaces.
To Next Page
Loading...