Page 71 of 126
Proton Products SL mini and SLR mini Series Speed and Length Gauges Instruction Manual - issue 1s
ETHERNET COMMUNICATIONS
This Ethernet interface is fitted as standard. It operates independently of the other communications
interfaces and may be accessed at the same time as them.
If an optional industrial bus interface (Ethernet/IP, PROFIBUS or DeviceNET) has been installed in
the gauge, then the Ethernet interface is substituted by the industrial bus interface.
Ethernet interface
The Ethernet interface may be accessed through the following pins:
Connector type: DB25 female (socket)
To Next Page
Loading...
Need help?
General
