Proton SL mini 3060 User Manual

Page 21 of 126
Proton Products SL mini and SLR mini Series Speed and Length Gauges Instruction Manual - issue 1s
INSTALLATION
PRECAUTIONS
Operating and storage temperature
Specification
Minimum
Typical
Maximum
Units
Operating temperature
+5
+45
° C
Storage temperature
0
+45
° C
 Do not store or operate the gauge in temperatures outside of the specified ranges.
 Do not install the gauge near high temperature surfaces or objects which may cause it to
overheat.
 Storage or operation of the gauge outside the specified temperature range may result in
degraded measurement accuracy, malfunction or damage to the gauge.
 All gauges are fitted with internal temperature sensors which will permanently log any over-
temperature condition that invalidates the warranty.
Protect from impact
Fragile
Do not drop
Protect from impact and
mechanical shock
 The gauge contains delicate optical and electronic assemblies and must never be dropped or
struck by other objects.
 Only install the gauge on its mounting/stand when all machining, assembly and transportation
of the mounting/stand has been completed.
 Do NOT strike, move or perform machining operations on the mounting/stand with the gauge
installed.
 Damage incurred by the gauge as a result of impact, mechanical shock or rough handling is
NOT covered by the manufacturer’s warranty.
Do not open or disassemble
 The gauge contains no user serviceable components.
 Loosening the gauge screws or removing its cover will invalidate the gauge warranty.
 Damage to or removal of any of the anti-tamper stickers will invalidate the gauge warranty.
 The gauge is factory-purged with dry nitrogen gas to prevent condensation on the internal
optics; opening of the gas purge ports (indicated below) will invalidate the gauge warranty.

Proton SL mini 3060 Specifications

General

Brand	Proton
Model	SL mini 3060
Category	Security Sensors
Language	English