Proton SL mini 3060 - Pulse Outputs; Pulse Outputs Connection

Page 95 of 126
Proton Products SL mini and SLR mini Series Speed and Length Gauges Instruction Manual - issue 1s
PULSE OUTPUTS
Pulse outputs connection
Four pulse outputs are fitted as standard and may be accessed through the following pins:
Connector type: DB25 female (socket)
Functional
group
Pin
Designation
Description
Notes
Pulse
outputs
1
POUT +V
Pulse output external
power supply
If no external power supply is
connected, then the pulse outputs
default to the internal +5V supply.
Maximum voltage: +24V
18
P1A
Pulse output 1
RS-422 compliant differential pair pulse
output 1.
19
/P1A
Inverted pulse output 1
20
P2A
Pulse output 2
RS-422 compliant differential pair pulse
output 2.
21
/P2A
Inverted pulse output 2
Power
supply and
ground
25
+24V
Power supply
For 24V pulse outputs, connect this pin
to POUT +V.
2
DGND
Power supply and
signal ground
reference
Ground reference for P1A, /P1A, P2A
and /P2A.
15
DGND
24
DGND
Shield
S
Shield
Shield
Connect to cable and plug shields
 RS-422 compliant differential pair (normal and inverse) outputs are provided for pulse outputs
“Pulse output 1(P1A, /P1A)” and “Pulse output 2 (P2A, /P2A)”; each pulse output can thus be
connected to both single-ended and differential interfaces.
 “Pulse output 1(P1A, /P1A)” and “Pulse output 2 (P2A, /P2A)” default to a 0 to +5V signal
range; if a higher output voltage is required, then an external voltage source up to +24VDC
may be connected across POUT +V and DGND to define the required voltage.
 “Pulse output 1” and “Pulse output 2” may be user-configured for either independent or
quadrature operation.
 In independent mode, “Pulse output 1” and “Pulse output 2” run independently and may be
configured with different pulse rates:
1
14
2
15
3
16
4
17
5
18
6
19
7
20
8
21
9
22 10 23 11 24 12 25 13