Proxim Tsunami MP-8100 Series - Ethernet Properties Configuration

Command Line Interface
Tsunami MP-8100 Reference Manual 48
Peer List Configuration
INDEX 4
SFC Name : UL-G711 20ms VoIP rtPS
Schedular Type : rtps
Traffic Direction : uplink
Class Status : active
MIR : 88
CIR : 88
Maximum Latency : 10
Tolerable Jitter : 10
Traffic Priority : 1
Maximum Number Of Messages In Burst : 16
Entry Status : enable
INDEX 5
SFC Name : DL-G711 20ms VoIP rtPS
Schedular Type : rtps
Traffic Direction : downlink
Class Status : active
MIR : 88
CIR : 88
Maximum Latency : 10
Tolerable Jitter : 10
Traffic Priority : 1
Maximum Number Of Messages In Burst : 16
Entry Status : enable
INDEX 6
SFC Name : unlimitedbe
Schedular Type : be
Traffic Direction : downlink
Class Status : active
MIR : 300000
CIR : 66
Maximum Latency : 10
Tolerable Jitter : 10
Traffic Priority : 1
Maximum Number Of Messages In Burst : 16
Entry Status : enable
System Name(config-worpqos)#peer-list
System Name(config-worpqos-peerlist)# rowadd 0 ?
Possible completions:
<[Enter]> Execute this command
class-index Class Index Configuration
comment Comment Configuration
entry-status Table Entry status
mac-address Mac Address Configuration
System Name(config-worpqos-peerlist)# rowadd 0 entry-status 4
System Name(config-worpqos-peerlist)# rowadd 0 class-index 2
System Name(config-worpqos-peerlist)# rowadd 0 coment string
System Name(config-worpqos-peerlist)# rowadd 0 mac-address 11:22:33:44:55:66
System Name(config-worpqos-peerlis)# rowadd 0 entry-status 4
System Name# show worp-qos peer-list
// WORP QOS PEER TABLE CONFIGURATION //
INDEX 1
Mac Address : 11:22:33:44:55:66
Class Index : 2
Comment : string
Entry Status : enable