Tsunami MP-8100 Reference Manual 75
3.6 NTP
3.7 Monitord
3.8 Routing
Error Type Message Description Corrective Action
ERROR Host ‘Host name configured’
couldn't be resolved
Setting of Primary server failed
as the host name could not be
resolved.
Check the domain name
configured.
ALERT Changed system time
according to the timezone
configured
System has changed according
to the configuration provided.
None
ERROR Host ‘Host Name Configured’
couldn't be reached
The configured server might be
down.
Check the servers
configured and, if
possible, use a different
NTP server.
ERROR Host ‘Host Name Configured’
couldn't be resolved properly
The configured domain name
could not be resolved.
Check the DNS and the
network configuration
along with the server
configured before
retrying.
Error Type Message Description Corrective Action
Alert Resetting ‘Interface Name’
Interface
Resetting the interface with the
name specified if it is inactive for
a period more than the
threshold defined.
NONE
EMERGENCY ‘Monitord configuration file’
file is missing
Configuration file is not
available.
Reboot the device
EMERGENCY Signal SIGSEGV received so
copying last known good
configuration into flashcfg.cfg
Segmentation fault error
occurred so copying last known
good configuration into the
present configuration.
Reboot the device if it is
not accessible.
CRITICAL Took Backup of current
configuration
After each commit or
initialization, we take backup of
current configuration if the
device is stable for two minutes.
NONE
Error Type Message Description Corrective Action
ALERT system level RIP is enabled Rip is enabled for the device. NONE
ALERT system level RIP is disabled Rip is disabled for the device. NONE
To Next Page
Loading...