Proxim Tsunami MP-8100 Series - Statistics Information

Command Line Interface
Tsunami MP-8100 Reference Manual 60
1.5.6.5 Temperature Configuration
Enter the following commands to configure the temperature parameters.
1.5.7 Statistics Information
1.5.7.1 Display the Black List Statistics
System Name(config-mon)# temperature
Possible completions:
exit Exits Back to Global Configure Mode
high-thershold High Threshold Configuration
interval Temperature Log Interval Configuration
low-thershold Low Thershold Configuration
reset Reset Configuration
System Name(config-mon-temp)# high-thershold 60
System Name(config-mon-temp)# interval 50
Setting Logging Interval to 0 will disable Temperature Log
Logging Interval can take values 0,1 and multiples of 5 upto 60
System Name(config-mon-temp)# low-thershold 50
System Name(config-mon-temp)# reset yes
System Name(config-mon-temp)# exit
System Name(config-mon)#exit
System Name(config)#exit
System Name# show templog
// TEMPERATURE CONFIGURATION //
Current Unit Temperature : 0
High Threshold : 60
Low Threshold : 50
Logging Interval : 50
Log Reset : 0
System Name# show statistics ?
Possible completions:
black-list Wireless Interface BlackList Information
icmp ICMP Statistics Information
interface Interface Statistics Information
iparp IP Arp Statistics Information
no-of-stations-connected Number of Station Connected Configuration
radius-authentication Radius Authentication Statistics Information
sitesurvey-info-tbl Display the SiteSurvey Operation Table Information
wireless-station Wireless Station Statistics Information
wireless-statistics Display the Wireless Statistics Information
worp-endPointa Display the Worp EndPointA Statistics Information
worp-qos Display the worp qos statistics
worp-sitesurvey Site Survey Statistics Information
worp-endPointb Display the Worp EndPointB Statistics Information
worp-statistics Worp Statistics Information
System Name# show statistics black-list
// WIRELESS INTERFACE BLACK LIST INFORMATION //