Proxim Tsunami MP-8100 Series - Vlan

Event Log Error Messages
Tsunami MP-8100 Reference Manual 80
3.14 VLAN
Error Type Message Description Corrective Action
ERROR Vlan initialization failed, Error
in getting radio operating
mode
Module Virtual LAN initialization
failed.
Check your license file
and the configuration
before rebooting the
device.
ERROR Vlan initialization failed, Access
vlan mode is not valid on
‘ethernet interface’ of
‘Configured Radio Mode’
Module VLAN initialization
failed as the configured radio
mode for a particular interface is
not valid.
Check your license file
and the configuration
before rebooting the
device.
INFO Vlan mode on ‘ethernet
interface’ on boot-up –
‘Current VLAN Mode’
Information regarding the
current VLAN mode for a
particular Ethernet interface
during initialization.
NONE
INFO Access vlan id on ‘ethernet
interface’ of on boot-up is
‘Current Access VLAN id’
Information regarding the
current access VLAN ID for a
particular interface during
initialization.
NONE
INFO Vlan status on boot-up –
‘Current VLAN Status’
Current VLAN status either
enabled or disabled during
initialization is displayed.
NONE
INFO Mgmt Vlan Id on boot-up is
‘Current Management VLAN
ID’
Current Management VLAN ID
is displayed during initialization.
NONE
INFO Mgmt Vlan Priority on boot-up
is ‘Current Management VLAN
Priority’
Management VLAN Priority is
displayed during initialization.
NONE
INFO Vlan status changed to –
‘Current VLAN Status’
Information regarding the status
of VLAN as configured
previously.
NONE
INFO Mgmt VLAN id changed to
‘Changed VLAN id’
Information regarding the
changed VLAN ID as configured
previously.
NONE
INFO Mgmt VLAN Priority changed
to – ‘Changed VLAN Priority’
Information regarding the
changed VLAN Priority as
configured previously.
NONE