Proxim Tsunami MP-8100 Series - Page 65

Command Line Interface
Tsunami MP-8100 Reference Manual 65
1.5.7.9 Display the WORP Statistics Information
1.5.7.10 Display the WORP SU Statistics Information
This is applicable only in BSU radio-mode.
System Name# show statistics worp-statistics
// WORP STATISTICS //
INDEX 1
Average Local Signal : 0 dBm
Average Local Noise : 0 dBm
Remote Signal : 0 dBm
Remote Noise : 0 dBm
Remote Partners : 0
Base Station Announces : 0
Request For Services : 0
Registration Requests : 0
Registration Rejects : 0
Authentication Requests : 0
Authentication Confirms : 0
Registration Attempts : 0
Registration Incompletes : 0
Registration Timeouts : 0
Registration Last Reason : 0
Poll Data : 0
Poll No Data : 0
Reply Data : 0
Reply More Data : 0
Reply No Data : 0
Poll No Replies : 0
Send Success : 0
Send Retries : 0
Send Failure : 0
Receive Success : 0
Receive Retries : 0
Receive Failure : 0
Note:Below values will be displayed only in EndPointA radio-mode.
Provisioned UpLink CIR : 0 Kbps
Provisioned DownLink CIR : 0 Kbps
Provisioned UpLink MIR : 0 Kbps
Provisioned DownLink MIR : 0 Kbps
Active UpLink CIR : 0 Kbps
Active DownLink CIR : 0 Kbps
Active UpLink MIR : 0 Kbps
Active DownLink MIR : 0 Kbps
UpLink BandWidth : 0 Kbps
DownLink BandWidth : 0 Kbps
System Name# show statistics worp-endPointb
This command displays statistics for WORP EndPointB