Tsunami MP-8100 Reference Manual 70
Figure 2-2 Options Window
In the Options window, you can delete or change V3 USM Users. To communicate with a V3 agent, you must have a
correct USM User entry for the agent and you must specify the USM User name in the session configuration
parameters when communicating with that agent.
2. To add a new user, click Add. To edit an existing user, click Edit. The USM User Entry window is displayed.
Figure 2-3 USM User Entry
3. Provide a name for the user. Same name and configuration are required on the agent. Provide an Engine ID by typing
a new Engine ID or get the Engine ID by clicking Find Id.
4. From the Authentication Protocol and Privacy Protocol drop-down menu, select none if no authentication is used.
Select either MD5 or SHA for Authentication and DES or AES-128 for Privacy. If any of these are selected, provide a
password for the protocols.
To Next Page
Loading...