Tsunami MP-8100 Installation and Management Guide 115
Figure 4-53: WORP Intra Cell Blocking Table
Group Name: This parameter specifies the name of the network group.
Entry Status: This parameter is used to configure the status of a specific group,
Enable: Discards all the packets coming from SUs which are not members of that group
Disable: Allows all the packets coming from SUs which are not the members of that group.
NOTE:
• Filtering process is not applied for the groups which are in Disable status.
• Click Commit to affect the changes in the device.
WORP Intra Cell Blocking MAC Table
Here, the SUs MAC address must be added for allowing communication with other SU’s. Maximum 250 entries can be made
to the table.
For configuring the Intra Cell Blocking MAC Table, navigate to Configuration>Filtering > WORP Intra Cell Blocking >
MAC Table.
To Next Page
Loading...
