Initializing sensor
The hint "Communication error" [1] suggests that the sensor has not been initialized although the laser
beam may have been correctly adjusted.
Tap either the detector area [2] or the sensor/laser area [3]to access the menu item 'Sensor list'.
Tap menu item 'Sensor list' [1] to view scanned sensors. The hint 'Bluetooth scanning started' [2]
appears during the scanning process. As soon as the sensor is detected, it is listed down and a green
bold dot [3] appears next to the detected sensor.
Initialize the sensor by tapping the listed sensor. A bold blue dot [1] signifes that sensor is initialized.
14 Edition: (Undefined variable: General.Edition)
(Undefined variable: General.UserGuideTitle)
To Next Page
Loading...