sensALIGN sensor
sensALIGN sensor contains two position detectors, which measure the exact position and inclination
of the laser beam as the shafts are rotated. Integrated in the sensor is Bluetooth technology for wireless
transmission of measurement data to ROTALIGN touch computer. sensALIGN sensor also transmits
sensALIGN laser data to the computer. The intelligent sensALIGN sensor technology is used to
determine shaft rotational angle and machine vibration.
Positioned at the front of sensALIGN sensor are following indicator LEDs:
›› Battery status LED
›› Bluetooth communication LED
›› Four beam adjustment LEDs
Understanding the beam adjustment LEDs
6 Edition: (Undefined variable: General.Edition)
(Undefined variable: General.UserGuideTitle)
To Next Page
Loading...