3) How to Save the Channel Manually on FM?
A. Save with Button “P”
Step1 : Long press <⑪P> to saving mode.
(Short pressing can not save the channel.）
Step2 : Press <⑧Previous/Rewind> or <⑩Next/Fast-forward> to select
the serial number you want to number the channel as.
Step3 : Press <⑨OK> to confirm. Then the screen will show the channel
has been stored successfully.
Preset Store
<4: 90.50MHz >
⑧ < : Short press ⑪ P : Long press
⑨ OK :
Short press
⑩ >
: Short press
B. Save with Long Pressing the Number Button Directly
E.g. If you want to number a channel as “P6” , you just need to long
press the number button “6” . Then the channel will be stored as P6
successfully.
Note : This method is only suitable for number 1-6.
Preset 4
Stored
Step1.
Step2.
Step3.
Preset Store
<4: 90.50MHz >
Long press button “6”
Preset 6
Stored
12
To Next Page
Loading...
