PTI security systems Falcon XT - Page 57

Appendix
53
Site Closeout Checklist (cont’d)
Video System:
□ Verify that each camera is in focus and can be clearly viewed at monitors.
□ Verify that each camera is adjusted to cover the area assigned to it.
□ Verify that each camera is sealed properly.
□ Verify that each monitor is functioning correctly.
□ Verify that the time, date, and camera descriptions are input for each camera in the
DVR.
□ Verify that video is recording at correct speed, frames-per-second, resolution, and
picture size.
□ Verify that video plays back and that rewind, fast forward, and search functions
work.
□ Verify the motion detection zones and settings if applicable.
□ Verify that VideoViewer can be brought up and used in the control software.
□ Verify that events clicked in EventViewer bring up the correct camera view
assigned.
Gate System:
□ Verify that the manual override control switch in the ofce opens the gate.
□ Verify that all gate safety equipment is working correctly and actually stops the gate
(loops, beams, photo eyes, millers edge, etc.).
Ofce Security Alarm:
□ Verify that each zone is set up correctly.
□ Verify that each zone arms and disarms correctly.
□ Verify that the siren is functioning properly.
□ Verify that access codes and master codes can be changed properly.
Other Items:
□ _____________________________________________________________
□ _____________________________________________________________
□ _____________________________________________________________
□ _____________________________________________________________
□ _____________________________________________________________
□ _____________________________________________________________
□ _____________________________________________________________
□ _____________________________________________________________
Initials: _____ _____