Operation & Installation Manual
SENTRY™ 1510
Section 7: Standard Cable Assemblies, Facility Requirements & Menu
Parameter Settings
11984 Rev 01 Page 1
7.1 Standard Cable Assemblies
A.2 0-5 Volt Analog Interface Powered from the Process Tool Controller
The following Cables are standard for this interface:
SENTRY to Supervisor Interface Cable: W101-35-S
Host to Supervisor cable: W202-15-S
A.3 RS422/RS485 Serial Connection Option
Serial Interface Cable: W010-xx (standard length is 50 feet)
To Next Page
Loading...