PTZOptics Move SE - Web UI

™
15
Web UI
To access the Web UI
1. Enter “http://ptzoptics.local/” or the camera’s IP address into a web browser.
2. Enter the username and password into the login elds. Both the username and
password are “admin” by default. You can change the login credentials on the System
Settings pag
e.
• Navigation panel: allows you to quickly and easily select the various control
options for the camera. It can be collapsed to make more room on the user interface.
• Camera Settings: gives you access to the Camera’s Video Feed, PTZ Control, OSD
Menu, Preset Control, Speed Settings, Image Settings & Control Settings.
• Audio & Video Settings: gives you access to the Video Encoding Settings, IP Video
Stream 1 / Stream 2 Encoding Settings & Audio Encoding Settings sections of the
network video feeds.
• Streaming Settings: gives you access to the RTMP(S) Settings, SRT Settings, RTSP
Settings, Multicast Settings & ONVIF Settings sections.
• Prole Settings: page gives you access to the Logo Upload, Prole Conguration,
Quick Proles, Custom CSS & Tutorial Mode sections.
• Network Settings: page grants access to the LAN Settings & NTP Settings
sections.
• MIDI Control: grants access to the PTZOptics MIDI Control, Control Mapping, Mass
Command Edit & Information sections. The MIDI Control page can be reached by
accessing the HTTPS version of the camera’s web interface. (https://[Camera IP]/).
The page must remain open for MIDI Control to function.
• Device Information: gives access to the Device Information section.
• System Settings gives access to the HTTPS Settings, IR Remote Channel
Selection, Access Settings, Firmware Check, Restore Default & Firmware Upload
sections.
For complete information regarding the Web UI, please refer to the User Manual found at
https://ptzoptics.com/documentation/