2
Preface
Before installation and usage, please read the manual thoroughly. If you have any
questions or issues with this process, please contact our Support Team.
Precautions
▪ Do not subject the camera to rain or moisture.
▪ Do not remove the cover. Removal of the cover will void the camera’s warranty and
may cause an electric shock. For any abnormal operation, please contact sup-
port@ptzoptics.com.
▪ Never operate outside of the specied operating temperature range or humidity.
▪ The power supply included in the box is the only power supply to be used with
this camera. If this power supply needs to be replaced, please vist ptzoptics.com/
where-to-buy/
▪ Please use a soft cloth to clean the unit. If the unit is very dirty, clean it with diluted
neutral detergent; do not use solvents which may damage the surface.
Warning
▪ Electrical safety
Installation must be in accordance with national and local electric safety
standards.
▪ Polarity of Power Supply
The power supply output for this product is 12V DC with a maximum current
supply of 2A. The polarity of the power supply plug is critical and is as follows:
▪ Handling
Ŝ Avoid any stress, vibration, or moisture during transportation, storage,
installation, and operation.
Ŝ Do not lift or move the camera by grasping the camera from the camera
head. Do not turn the camera head by hand. Doing so may result in
mechanical damage.
Ŝ Do no expose the camera to any corrosive solid, liquid, or gas.
Ŝ Please make sure that there are no obstacles in the pan or tilt ranges of the
camera lens.
Ŝ After installation is complete and secure, power on the camera.
Ŝ Do not dismantle the camera - PTZOptics is not responsible for any
unauthorized modication or dismantling.
To Next Page
Loading...
