Pullmaster M18 Series - Page 211

PAGE 30
APPENDIX A
* Performance specifications are based on standard hydraulic motor with 1 1/4 inch diameter rope.
POUNDS
(KILONEWTONS)
DRUM
CODE
CABLE DRUM SIZES
INCHES
(MILLIMETERS)
WIRE ROPE STORAGE
FEET
(METERS)
FEET/MINUTE
(METERS/MINUTE)
LINE PULL
AT MAXIMUM
PRESSURE*
BARREL FLANGE LENGTH 1 1/4 inch 1 1/8 inch 1 inch
LINE SPEED
AT MAXIMUM
VOLUME*
BARE FULL BARE FULL
DRUM DRUM DRUM DRUM
LUBRICATING
OIL
VOLUME
REQUIRED
U.S.
GALLONS
(LITERS)
253 REV.060315
-1 14.0 23.8 14.0 177 195 276 50000 33889 69 102 7.0
(356) (603) (356) (54) (60) (84) (222.4) (150.7) (21) (31) (26)
- 2 18.0 30.0 22.0 440 605 654 39610 26522 88 131 12.7
(457) (762) (559) (134) (184) (199) (176.2) (118.0) (27) (40) (48)
- 13 14.0 36.0 36.0 1503 1858 2221 50000 21942 69 158 12.0
(356) (914) (914) (458) (566) (677) (222.4) (97.6) (21) (48) (45)