To Next PageTo Next Page
Need help?Do you have a question about the Pullmaster M8 Series and is the answer not in the manual?
Describes how torque and RPM are transmitted in forward rotation, including the over-running clutch function.
Details the hydraulic pressure mechanism for releasing the brake and smooth lowering operation.
Specifies the maximum pressure the winch can safely operate under.
Details the maximum load the winch can lift on a bare and full drum.
Provides the hoisting speed on a bare and full drum at maximum volume.
Graph showing the relationship between line pull and oil pressure for bare and full drums.
Graph illustrating line speed versus oil volume for bare and full drums.
Requires a pressure relief set at operating pressure, usually part of the control valve.
Mandates E-stop use for European machinery directive applications.
Addresses issues where the winch fails to achieve specified maximum line pull.
Addresses issues where the winch fails to achieve specified line speed.
Lists probable causes for the winch brake failing to hold a load.
General| Model | M8 Series |
|---|---|
| Type | Hydraulic Winch |
| Power Source | Hydraulic |
| Rated Line Pull | 8, 000 lbs (3, 629 kg) |
| Rope Size | 3/8 in (9.5 mm) |
| Rope Diameter | 3/8 in (9.5 mm) |
| Hydraulic Pressure | 2, 500 psi |
