Pullmaster HL25 User Manual

PMC 313 030619
INSTRUCTION AND PARTS MANUAL
MODEL HL25
PLANETARY HYDRAULIC WINCH
PML
THE LOGICAL CHOICE
PULLMASTER WINCH CORPORATION
8247-130th Street, Surrey, B.C. V3W 7X4, Canada
Telephone: 604-594-4444 Fax: 604-591-7332
Website: www.pullmaster.com
E-mail: sales@pullmaster.com
READ THIS MANUAL BEFORE INSTALLING, OPERATING OR
SERVICING THIS PRODUCT. THIS MANUAL CONTAINS IMPORTANT
INFORMATION. MAKE THIS MANUAL AVAILABLE TO ALL PERSONS
RESPONSIBLE FOR THE OPERATION, INSTALLATION, SERVICING
AND MAINTENANCE OF THIS PRODUCT.

Pullmaster HL25 Specifications

General

Brand	Pullmaster
Model	HL25
Category	Winches
Language	English

Summary

PULLMASTER LIMITED WARRANTY

SAFETY RECOMMENDATIONS

DESCRIPTION OF THE MODEL HL25

LOW FORWARD SPEED

Explains operation in low forward speed mode, torque transmission and clutch engagement.

RAPID FORWARD SPEED

Explains operation in rapid forward speed mode, speed increase and line pull reduction.

RAPID REVERSE

Details the operation in reverse rotation, brake engagement, and heat dissipation.

EXPLANATION OF MODEL CODING

SPECIFICATIONS

RECOMMENDATIONS

HYDRAULIC FLUID

Details recommended hydraulic fluid types, viscosity, and temperature ranges.

LUBRICATION

Provides instructions for winch gear train lubrication and oil fill ports.

PERFORMANCE GRAPHS FOR STANDARD GEAR MOTOR

TYPICAL HYDRAULIC CIRCUIT GEAR MOTOR

INSTALLATION INSTRUCTIONS

OPERATING INSTRUCTIONS

TROUBLE SHOOTING

SERVICE INSTRUCTIONS

DISASSEMBLY OF HYDRAULIC GEAR MOTOR ASSEMBLY

Instructions for disassembling the hydraulic gear motor assembly.

DISASSEMBLY OF FINAL DRIVE

Steps to disassemble the final drive.

REASSEMBLY OF PRIMARY DRIVE

Procedure for reassembling the primary drive.

RECOMMENDED MAINTENANCE

PARTS REFERENCE - FINAL DRIVE

INSTALLATION DIMENSIONS GEAR MOTOR

BOLT TORQUE CHART