PAGE 19
PRIMARY PLANETARY DRIVE
SERVICE INSTRUCTIONS CONTINUED
399 24093 1 SUB-ASSY PRIMARY PLANETARY DRIVE
400 24095 1 PLANET HUB HLV30 PRIMARY
410 24094 3 PLANET PIN PL4 FINAL M25 PRIMARY
413 26773 6 CIRCLIP ROTOR CLIP SH-84
420 24096 3 PLANET GEAR HLV30 PRIMARY
421 26772 6 THRUST WASHER TORRINGTON # TRC 1427
423 25308 45 LOOSE ROLLER 7/32 DIA X 1.50
444 21809 1 STOPPER SUNGEAR - SPEC 224
5) DISASSEMBLY OF PRIMARY PLANETARY DRIVE (item 399):
If primary Planet Gears, item 420, must be removed, proceed as follows:
5.1) Remove Circlip item 413 from Planet Pin item 410, and press Planet Pin out of Primary Planet Hub,
item 400. Remove Primary Planet Gear item 420, together with Loose Rollers item 423 and Thrust
Washers item 421.
5.2) Inspect Primary Sungear Stopper item 444 for wear, replace if thickness is less than 0.21 inch.
400
444
413
421
423
420
410
421
413
354 REV.060315
To Next Page
Loading...
