PAGE 5
240 REV.001122
SPECIFICATIONS
Performance specifications are based on standard hydraulic motor, gear ratio and cable drum with 3/4 inch diameter
wire rope. For other cable drums refer to APPENDIX A. For other reductions or motors, refer to supplement inside
back cover. Performance specifications for winches supplied with optional motors are provided in attached
supplement.
CABLE DRUM DIMENSIONS (STANDARD DRUM):
Barrel diameter 8.50 in 216 mm
Flange diameter 15.50 in 394 mm
Barrel length 10.00 in 254 mm
CABLE STORAGE CAPACITY:
(Size of wire rope) 3/8 in 615 ft 187 m
7/16 in 494 ft 151 m
1/2 in 332 ft 101 m
9/16 in 310 ft 94 m
5/8 in 239 ft 73 m
3/4 in 170 ft 52 m
7/8 in 113 ft 34 m
MAXIMUM OPERATING PRESSURE: 2300 psi 159 bar
MAXIMUM OPERATING VOLUME: 76 (US) gpm 288 l/min
MINIMUM OPERATING VOLUME: 20 (US) gpm 76 l/min
DRUM TORQUE AT MAXIMUM PRESSURE: 83,250 lb-in 9,406 Nm
DRUM RPM AT MAXIMUM PRESSURE: 50.5 rpm
LINE PULL AT MAXIMUM PRESSURE:
Bare drum 18,000 lb 80.1 kN
Full drum 11,288 lb 50.2 kN
LINE SPEED AT MAXIMUM VOLUME:
Bare drum 122 fpm 37 m/min
Full drum 195 fpm 59 m/min
PERMISSIBLE SYSTEM BACK PRESSURE AT
MOTOR RETURN PORT:
65 psi 4.5 bar
PERMISSIBLE PRESSURE AT CIRCULATION
SUPPLY PORT:
30 psi 2 bar
LUBRICATING OIL: Refer to RECOMMENDATIONS for viscosity and instructions.
Refer to APPENDIX A for oil volume required.
To Next Page
Loading...
