PAGE 24
240 REV.980615
PARTS REFERENCE - MOTOR GROUP
ITEM NO.
QTY.
PART NO.
DESCRIPTION
730 1 21322 MOTOR DRIVE SHAFT
731 1 25288 CIRCLIP ROTOR CLIP C-112
800 1 21952 MOTOR ADAPTOR
801 3 25127 O-RING -013 7/16"ID 1/16" CS
802 1 * *
805 3 25040 PIPE PLUG 1/8 - 27 NPT
806 1 * *
807 1 * *
809 1 * *
813 1 25031 PIPE PLUG 1/4 -18 NPT
821 8 25081 CAPSCREW - HEX HEAD 1/2 - 13NC X 1.50 GRADE 5
823 8 25014 LOCKWASHER 1/2"
861 1 25795 GEAR HOUSING -101 COMM. #322 8222 100
865 4 25779 DOWEL PIN - HOLLOW COMMERCIAL #391 2082 069
869 2 25780 SEAL - GASKET COMMERCIAL #391 2884 023
870 1 21993 PORT END COVER M365 (INCLUDES 2 EACH OF ITEMS: 875, 955 & 959)
875 4 25782 BUSHING COMM. #391 0482 307
881 1 25794 GEAR SET -101 COMM. #322 2822 000
885 2 25774 THRUST PLATE COMM. #391 2185 060
887 4 25775 SEAL - END CHANNEL COMM. #391 2885 070
891 4 25776 SEAL - SIDE CHANNEL COMM. #391 2885 069
897 2 25787 SEAL - BACKUP COMM. #391 2885 071
929 1 * *
950 1 * SUB-ASSY MOTOR -101 COMM. M365-2.25
951 4 25793 CAPSCREW - HEX HEAD 3/4 -10NC X 6.0" GRADE 5
953 4 25784 WASHER COMM. #391 3782 114
955 2 25585 PLASTIC CAPLUG 1.625" -12
959 2 25031 PIPE PLUG 1/4 - 18 NPT
23139 MOTOR SEAL KIT, CONSISTS OF ITEMS:
869, 887, 891 AND 897.
NOTE: ITEM 950, MOTOR SUB-ASSY, CONSISTS OF ITEMS:
800, 802, 805, 806, 807, 809, 813, 861, 865, 869, 870,
875, 881, 885, 887, 891, 897, 929, 951, 953, 955 AND 959
* These part numbers and descriptions vary according to brake code.
Refer to APPENDIX C.
Refer to PAGE 22 for winch seal kit and PAGE 28 for ASSEMBLY DRAWING.
To Next Page
Loading...
