PAGE 24
ITEM NO.
QTY.
PART NO.
DESCRIPTION
800 1 21973 MOTOR ADAPTOR
801 1 25310 O-RING -012 3/8" ID 1/16" CS
802 1 * *
803 1 25370 PIPE PLUG 1/16 - 27 NPT
804 1 * *
805 2 25040 PIPE PLUG 1/8 - 27 NPT
807 1 * *
809 1 * *
821 12 25118 CAPSCREW - HEX HEAD 3/8 - 16 NC X 1.25 GRADE 5
823 12 25037 LOCKWASHER 3/8"
861 1 25323 GEAR HOUSING -030
865 4 25326 DOWEL PIN
869 2 25315 SEAL - BODY
870 1 21759 PORT END COVER
875 4 25322 BEARING - ROLLER
877 2 25908 SEAL - RING
881 1 25317 GEAR SET -030
885 2 25320 THRUST PLATE
887 1 25321 SEAL STRIP
899 2 25031 PIPE PLUG 1/4 - 18 NPT
929 1 * *
950 1 * SUB-ASSY MOTOR -030 (WM31-2.0)
951 4 25324 CAPSCREW - HEX HEAD 5/8 - 11 NC X 5.25 GRADE 5
953 4 25325 WASHER
955 2 25556 PLASTIC CAPLUG 1.312" -12 THREADED
23131 MOTOR SEAL KIT, CONSISTS OF ITEMS:
869, 877, AND 887.
NOTE: ITEM 950, MOTOR SUB-ASSY, CONTAINS ITEMS:
800, 802, 803, 804, 805, 807, 809, 861, 865, 869, 870,
875, 877, 881, 885, 887, 899, 929, 951, 953 AND 955.
* These part numbers and descriptions vary according to brake code.
Refer to APPENDIX C.
247 REV.981101
PARTS REFERENCE - MOTOR GROUP
Refer to PAGE 22 for winch seal kit and PAGE 28 for ASSEMBLY DRAWING.
To Next Page
Loading...
