LCDM-2000
- Are EXIT SENSOR & EJT SENSOR normal?
- Is LOCKING device in GUIDE CASH FEED 7 ASS’Y
locked normally?
- Is idle roller rotation status in GUIDE CASH FEED 7 ASS’Y
normal?
Check Point
-Jam in EXIT SENSOR part
-There is difference in bill data between EJT SENSOR & EXIT
SENSOR
- TIMEOUT between DIV SENSOR and EJT SENSOR
Details
- Try again after checking above situation.
- Replace ASS’Y in case of roller rotation problem in GUIDE
CASH FEED 7 ASS’Y.
Management
35, 3D, 43CODE
To Next Page
Loading...