EasyManuals Logo

Pulsar 2 Pro User Manual

Pulsar 2 Pro
96 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
Precautions
Only use the charger supplied with the Battery Pack. The use of any other charger may
irreparably damage the Battery Pack or the charger and may cause fire.
During long-term storage, the Battery Pack should be partially charged – the charge level
should be between 50% and 80%.
Do not charge the Battery Pack immediately after bringing it from a cold environment to a
warm one. Wait for 30-40 minutes for the Battery Pack to get warm.
Do not leave the Battery Pack unattended while charging.
Never use a modified or damaged charger.
Charge the Battery Pack at a temperature from 0° C to +45° C (32° F to +113° F),
otherwise the battery life will decrease significantly.
Do not leave the Battery Pack with a charger connected to the power adapter after
charging is complete.
Do not expose the Battery Pack to high temperatures or an open flame.
Do not submerge the Battery Pack in water.
Do not connect an external device with a current consumption that exceeds permitted
levels.
The Battery Pack is short circuit protected; however, any situation that may cause short-
circuiting should be avoided.
Do not dismantle or deform the Battery Pack.
When using the Battery Pack at sub-zero (sub 32° F) temperatures the battery capacity
decreases. This is normal and is not a defect.
Do not use the Battery Pack at temperatures above those shown in the table – this may
decrease battery life.
Do not drop or hit the Battery Pack.
Keep the Battery Pack out of the reach of children.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pulsar 2 Pro and is the answer not in the manual?

Pulsar 2 Pro Specifications

General IconGeneral
BrandPulsar
Model2 Pro
CategoryBinoculars
LanguageEnglish

Related product manuals