Technical Maintenance and
Storage
Maintenance should be carried out no less frequently than twice a year, and should consist of
the following measures:
Wipe external plastic and metal surfaces with a cotton cloth to remove dust and dirt. To
avoid damage to the paint coating, do not use chemically active substances, solvents, etc.
Clean the electric contacts of the Battery Pack and the device's battery slot using a non-
greasy organic solvent.
Check the objective and eyepiece lenses and if required, remove dust and dirt (preferably
using a non-contact method). Cleaning of the exterior surfaces of the optics should only
be done with products specifically designed for this purpose.
Store the device in a carrying case. Remove the Battery Pack for long-term storage.
To Next Page
Loading...
