Pulsar Axion 2 User Manual

Battery is fully charged. It can
be disconnected from the
charger.
Defective battery. Do not use
the battery!
* Available separately
** Standby mode is when the batteries are in the charger but the Power
Adapter is not connected. In this mode, the indicators are only on for 10
seconds.
Attention! When using a Power Adapter that does not support USB Power
Delivery fast charging technology, the flicker frequency of the LED
indicators decreases by a factor of 3 and the charge time increases.
Attention! The charger heats up during fast charging. Excess heat is
removed through the radiator and does not affect the device operation.

Pulsar Axion 2 Specifications

General

Display Type	AMOLED
Video/Photo Recording	Yes
Built-in Memory	16 GB
Stream Vision 2 Compatibility	Yes
Ingress Protection	IPX7
Digital Zoom	4x
Display Resolution	1024x768
Wi-Fi	Yes
Sensor Resolution	640x480
Pixel Pitch	12μm