Pulsar Axion 2 User Manual

Battery Installation
1.
Put the Lock-cover (12) on the rechargeable APS 5 battery (11).
2.
Insert the APS 5 battery (11) along the guide into the battery
compartment (13).
3.
Lock the battery (11) by turning the Lock-cover (12)clockwise until it
stops.
4.
Turn the Lock-cover (12) counter-clockwise to remove the battery (11).

Pulsar Axion 2 Specifications

General

Display Type	AMOLED
Video/Photo Recording	Yes
Built-in Memory	16 GB
Stream Vision 2 Compatibility	Yes
Ingress Protection	IPX7
Digital Zoom	4x
Display Resolution	1024x768
Wi-Fi	Yes
Sensor Resolution	640x480
Pixel Pitch	12μm