Pulsar Axion 2 User Manual

External Power Supply
Show device diagram
External power can be supplied from an external source, such as a Power
Bank (5 V, 9 V).
1.
Connect the external power source to the USB Type-C connector (9) on
the device.
2.
The device will switch to draw power from the external source while the
АPS5 battery is gradually recharged.
3.
A battery icon will appear on the display showing the percentage-
charged level.
4.
An icon will be displayed when the device is powered by an

Pulsar Axion 2 Specifications

General

Display Type	AMOLED
Video/Photo Recording	Yes
Built-in Memory	16 GB
Stream Vision 2 Compatibility	Yes
Ingress Protection	IPX7
Digital Zoom	4x
Display Resolution	1024x768
Wi-Fi	Yes
Sensor Resolution	640x480
Pixel Pitch	12μm