Pulsar EN54M Series User Manual

www.pulsar.pl EN54M RED POWER plus
4
1. PSU features.
 Built-in power supply module
 In accordance with standards: EN 54-4,
EN12101-10
 27,6 V DC uninterruptible power supply
 available versions with 2 A/3 A/5 A/10 A current
efficiencies
 available versions with space for 7 Ah – 65 Ah
batteries
 independently protected outputs AUX1 and AUX2
 DIN rail mounting using additional EN54M-DIN1
bracket (optional equipment)
 cooperation with EN54C-LB4 and EN54C-LB8 fuse
modules (optional equipment)
 cooperation with EN54C-LS4 and EN54C-LS8
sequential modules (optional equipment)
 optical indication – LED panel EN54M-LED (option)
 high efficiency (up to 89%)
 low level of voltage ripple
 microprocessor-based automation system
 measurement of the resistance of the battery circuit
 automatic temperature-compensated charging
 automatic battery test
 two-stage battery charging process
 accelerated battery charging
 monitoring of the continuity of the battery circuit
 monitoring of the battery voltage
 monitoring of charging and maintenance of the
batteries
 deep discharge battery protection (UVP)
 battery overcharge protection
 the LoB low battery voltage indication
 battery output protection against short-circuit and
reverse connection
 output voltage control
 fuse monitoring of AUX1 and AUX2 outputs
 relay output of collective failure ALARM
 EPS relay output indicating 230 V power loss
 the EXTi input of external failure
 protections:
 SCP short-circuit protection
 OLP overload protection
 OVP overvoltage protection
 Surge protection
 convection cooling (forced only in the EN54M-
10Axx)
 warranty - 3 years from the production date

Pulsar EN54M Series Specifications

General

Brand	Pulsar
Model	EN54M Series
Category	Control Unit
Language	English