Pulsar KRYPTON - Page 2

Functions
USB connection
Video recording and photography
Wi - fi function
Display calibration
Wireless Remote Control
Description of controls
Remote control activation
Software
Firmware update
Stream vision 2
Maintenance
Technical inspection
Technical maintenance and storage
Troubleshooting
The supplied USB cable is broken
Remote control does not work
Residual horizontal lines and traces of horizontally placed objects during observation
process .
Device malfunction
The device does not operate from an external power source
Blurred image with vertical stripes or an uneven background
Poor quality image . There is noise or ghost images of previous scenes or objects
Black screen after calibration
When the device is turned on , the calibration frequency is at first higher , then
decreases ( if the automatic calibration mode is enabled )
Image is too dark
Color bars appear on the display or the image disappears
The device does not turn on
The image of the object being observed is missing
Poor image quality / Reduced detection distance
Smartphone or tablet cannot be connected to the device
Missing or interrupted broadcasting via Wi - Fi
When the device is used in low temperature conditions the image quality is worse than
in positive temperatures .
Legal compliances and disclaimers