Pulsar PG6000R - Assembly; Unpacking and Packing List

9
ASSEMBLY
Description Qty
Handles
Screw
Nut
2
2
4
Wheels
2
Hair pin
2
Axles
2
Unpacking
1. Place box on a level surface.
2. Remove all items from box except the generator. Make sure all items listed on the packing list are included and not
damaged.
3. Cut down the sides of the box being careful to avoid hitting the generator.
4. Leave generator on box to install wheel assembly.
Packing List
Check all loose parts to the following list. Contact your dealer if any loose parts are not included.
Description Qty
Generator
1
Operator’s manual
1
Product registration card
1
Toolkit
Spark Plug Wrench
1
1
Washer
2
Description Qty
Supporting Leg
Nut
2
2
Funnel
+
+
+
+
+ + + +
+ ++ +
( )
++ +
Handle Assembly Wheel Assembly
Foot Assembly
2
Bushings (Flanged)
+
Screw
2