Why does my Pulsar PG6000R Portable Generator lack power?
If your Pulsar Portable Generator engine lacks power, it could be due to a few reasons. The generator might be overloaded. Also, a clogged fuel filter or a dirty air filter can cause this issue, so clean or replace them as needed. If these steps don't help, the engine may need servicing, and you should contact the service department.
How to fix a Pulsar PG6000R Portable Generator with no AC output?
If your Pulsar Portable Generator engine is running, but there's no AC output, it could be due to several reasons. Check if the circuit breaker is open and reset it. Inspect for poor connections and repair them if necessary. Also, check and repair any defective cord sets. Ensure the connected device is working correctly by testing with a known good device. If none of these steps resolve the issue, there may be a fault in the generator, and you should contact the service department.
What to do if Pulsar PG6000R bogs down under load?
If your Pulsar Portable Generator engine runs well without a load but bogs down when loads are connected, there could be a few reasons. A short circuit in the connected device is a possible cause, so disconnect the device. It could also be that the generator is overloaded. Additionally, a clogged fuel filter can cause this issue, so clean or replace the fuel filter. For engine speed issues or a short circuit in the generator, contact the service department.
Why does my Pulsar PG6000R engine hunt or falter?
If your Pulsar Portable Generator engine “hunts” or falters, it could be due to a few reasons. If the choke was removed too soon, move it to the middle position until the engine runs evenly. Another cause could be a clogged fuel filter, so clean or replace it. If the carburetor is running too rich or too lean, contact the service department.
General| Model | PG6000R |
|---|---|
| Type | Portable Generator |
| Engine Type | 4-Stroke OHV |
| Fuel Type | Gasoline |
| Start Type | Electric/Recoil |
| AC Output | 120/240V |
| DC Output | 12V, 8.3A |
| Dimensions (L x W x H) | 27.2 in x 22.1 in x 22.4 in |
Details the generator's electrical and engine specifications.
Provides contact details for Pulsar Products Inc. for inquiries and assistance.
Explains the meaning of various hazard symbols used in the manual.
Provides critical instructions on safe operation, handling, and awareness of hazards.
Details the extreme danger of operating the generator indoors due to carbon monoxide.
Covers electrical safety, flammable materials, hot surfaces, and recoil hazards.
Focuses on safe handling of the starter cord and hot engine parts.
Details grounding, modifications, proper usage, and part integrity for safe operation.
Emphasizes using correct parts and notes specific warnings like Prop 65.
Identifies and describes the main controls and indicators on the generator's panel.
Identifies additional external components like fuel vent, choke lever, and fuel tank.
Instructions for unpacking and verifying all included parts.
Step-by-step guide on installing wheels and the support leg.
Procedure for adding and checking the correct oil level before operation.
Important caution regarding the type of fuel to use and not to use.
Instructions on how to safely add fuel to the generator's tank.
Guidance on safely connecting the generator to a building's electrical system.
Explains the critical procedure for grounding the generator to prevent electrocution.
Step-by-step instructions for starting the generator's engine.
Detailed steps for safely shutting down the generator engine.
Information on generator outlets and selecting appropriate extension cords.
Cautions regarding connecting 3-phase loads and the 12V DC output usage.
A table and guide for selecting the correct extension cord based on current and length.
Explains GFCI usage and safe methods for moving the generator.
Guidance on calculating and managing load to prevent generator overload.
A guide listing approximate wattages for various common appliances.
Explains the purpose and display of the digital hour meter for maintenance tracking.
Recommendations for connecting loads efficiently to prevent overloading.
Steps to prevent freezing issues in cold and humid conditions.
Essential checks to perform before starting and after using the generator.
A schedule outlining maintenance tasks based on usage hours or time.
Detailed instructions for draining and refilling the engine oil.
Guidance on selecting the correct engine oil viscosity based on temperature.
Steps for cleaning/replacing the air filter and inspecting the spark plug.
Instructions for spark arrestor inspection and notes on cooling system service.
Steps for replacing a clogged or old fuel filter.
Procedures for draining fuel for storage and preventing gum deposits.
Guidelines for properly storing the generator for short-term and long-term periods.
Causes and solutions for no AC output despite engine running.
Explains why the engine might bog down or stall and how to fix it.
Covers common issues preventing the engine from starting or causing rough running.
Identifies reasons for power loss and their solutions.
Addresses engine performance issues like hunting or faltering and their causes.
Details the terms and conditions of the 2-year limited warranty.
Outlines the owner's duties for maintaining warranty coverage and seeking service.
Lists items and conditions not covered by the warranty.
Specifies geographical locations and purchase conditions for warranty validity.
Provides instructions on how to initiate warranty service or repairs.
To Next Page
