B
Bryan NelsonJul 31, 2025
What to do if my Pulsar PG2000 won't start?
- JjanetvasquezJul 31, 2025
If your Pulsar Portable Generator won't start, several factors could be the cause: * Check if there's enough fuel in the tank and refill if needed. * Ensure there's sufficient oil in the engine, adding the recommended oil if necessary. * Inspect the spark plug, readjust the gap, and dry it. Replace the spark plug if it's in poor condition. * Also, verify that fuel is reaching the carburetor, and clean the fuel sediment cup if it is not.