Name: Pulsar PGD95BiSCO
Brand: Pulsar
Rating: 5 (1 reviews)

Questions and Answers:

G
gonzalezbethJul 29, 2025
Why does my Pulsar PGD95BiSCO Portable Generator engine stop suddenly?
- G
  gyoungJul 29, 2025
  If your Pulsar Portable Generator engine stops suddenly, it could be due to several reasons. Check the engine oil level and fill to the proper level if low. Ensure the fuel tank is filled with fresh 87+ octane stabilizer treated unleaded gasoline, avoiding fuel with more than 10% ethanol. A defective fuel tank cap can create a vacuum, so test or replace it. Also, make sure the spark plug cap is securely connected.
M
Megan PhelpsAug 2, 2025
What to do if my Pulsar PGD95BiSCO Portable Generator engine misfires?
- N
  Nicholas JohnsonAug 3, 2025
  If your Pulsar Portable Generator engine is misfiring, check the spark plug cap and wire connections to ensure they are secure. Re-gap or replace the spark plug if it's damaged or the gap is incorrect. Also, ensure you are using fresh 87+octane stabilizer-treated unleaded gasoline, and avoid gasoline with more than 10% ethanol.
S
Stephen MorenoAug 7, 2025
Why is my Pulsar PGD95BiSCO engine knocking?
- I
  iconleyAug 7, 2025
  If your Pulsar Portable Generator engine knocks, it could be due to old or low-quality gasoline. Fill the fuel tank with fresh 87+octane stabilizer- treated unleaded gasoline, and do not use gasoline with more than 10% ethanol. Also, ensure that you are not exceeding the equipment's load rating, as the engine may be overloaded.
P
petersondanielAug 12, 2025
Why does my Pulsar PGD95BiSCO Portable Generator engine backfire?
- J
  jennifer29Aug 12, 2025
  If your Pulsar Portable Generator engine backfires, it is likely due to impure or low-quality gasoline. To resolve this, fill the fuel tank with fresh 87+ octane stabilizer treated unleaded gasoline. Make sure that you do not use gasoline with more than 10% ethanol.