Important Friendly User Tips:
• For best results, fill chamber halfway or more, but do not pack
tightly, this allows for even heat distribution and room to stir your
herbal blends if necessary throughout usage.
• Once the vaporizer reaches desired temperature, allow 30 seconds
before using. This ensures the herbs in the chamber are evenly
heated, maximizing efficiency.
• Always allow unit to reheat for 5 seconds between each inhale.
• To maximize efficiency, after using allow unit to cool, and then stir
herbs before the next cycle.
Be sure to turn off the unit when you are done by Clicking the on/
off button 5 times withing a few seconds. This will ensure the unit is
“Locked” & will not heat until you turn it on again.
Kit Contents
• 1 Pulsar
®
Vibe Vaporizer
• 1 Cleaning brush
• 1 Packing tool
• 1 User Manual
• 1 USB Cable
• 1 Wall Charger
3 4
To Next Page
Loading...
Need help?
General
