Tech Specs
Micro USB Charging Port
LED Digital Screen Battery Life and Heat Setting Indicator
Battery Charge Time: 1 - 3 Hours
Precision Temp Setting range: 350°F – 430°F
5-Click On/Off & Locking Function
Temperature Setting Memory
5-Minute Auto Shut off
Measurement size: 5”x1”x1”
Capacity & Output: 1pcs 2200mAh Li-polymer Batteries/4V
Continuous working time: 60 min (upon full charge)
Battery Low Indication: Blue flashing light – 20 times before shutdown
Convection Metal Heating chamber
Food-safe Acrylic Mouthpiece
Charging Instructions: IMPORTANT: You will need to fully
charge your Pulsar
®
Vibe before using it.
Insert charger plug into unit & the other end into a dedicated USB
port or wall socket if using AC wall adapter (included!). Set Pulsar
®
Vibe on its side – do not let unit dangle from charge cord. This puts
pressure on the charger plug that can result in the unit not charging
fully. The initial charge time can take up to 4 hours. Additional
charges should take approximately 3 hours each. Please note:
LED will flash slowly while charging & will turn solid when unit is fully
charged.
5 6
To Next Page
Loading...
Need help?
General
