Pulsar Vibe - Operating the Pulsar Vibe; How to Use

Low battery indication: When battery requires charging, display
screen will show indicator as empty, the blue light will flash 20
times and turn off. You will not be able to run a cycle until you fully
recharge the unit.
AC Wall Adapter: Use ONLY Pulsar
®
brand AC Wall Adapters! Failure
to follow warnings contained within this manual can result in property
damage or personal injury, and will void the warranty.
The Pulsar
®
Vibe battery will deliver approximately 1 hour of
continuous power, depending on use. The battery indicator shows
continuously and will blink & the unit will turn off when charging is
needed. Both the battery and chargers are designed to prevent
overcharging. ONLY USE APPROVED PULSAR
®
CHARGERS! Failure
to do so can damage the battery, which can result in property
damage or personal injury and will void the warranty.
Using Pulsar
®
Vibe
1. Push the mouthpiece from the back side of the mouthpiece
towards the front.
2. Fill heating chamber with finely ground herbs or loose tobacco.
For best results: Do not overfill or pack herbs too tightly.
3. Replace mouthpiece securely.
7 8