Cleaning Instructions
Always clean the unit after each use to avoid excessive build up,
which will interfere with the function of your Pulsar® Vibe Vaporizer
and can affect your warranty status.
1. Remove the mouthpiece.
2. Remove the screen housing, use the brush to gently push the
screen out & clean or replace.
3. Dump the contents out & tap gently on your hand to make sure all
particles are removed
4. Using the same brush; push into the chamber and twist gently to
remove any residue from the walls of the chamber
5. Replace the mouthpiece
6. Your Pulsar
®
Vibe is ready for storage or use!
IMPORTANT TIP: Do not use cleaning solutions, solvents, or other
chemicals when cleaning your Pulsar
®
Vibe. Doing so can result in
undesired tastes or smells and can cause potential health hazards.
11 12
To Next Page
Loading...
Need help?
General
