5
WARNING
To reduce the risk of injury from accidental starting, turn the vacuum off and
unplug the power cord before emptying the collection tank.
To reduce the risk of back injury or falls, do not lift a collection tank heavy
with dust and debris. Scoop enough contents out to make the collection tank
light enough for one person to lift comfortably.
EMPTYING TANK
• Remove the 2 knobs holding the Head Assembly on the Tank. (Refer Figure 2: Empty Tank)
• Remove the Head Assembly using the handle on the Head Assembly and place it on a at surface where
It is safe from falling.
• Place the Head Assembly on the tank so that the two alignment pins mounted on the tank align with the
mounting holes on the Base Plate of the head assembly.
• Secure the head assembly with the two knobs.
Figure 2
To Next Page
Loading...
Need help?
General